top of page

Safety first, security right after: how the new Machinery Regulation changes industrial safety

20 hours ago
4 min read

Published on: November 20, 2026

Estimated reading time: 4 minutes

Written by: Claudia Piccolo



In the industrial world, "safety" has traditionally been associated with physical guards, light curtains, and emergency stop buttons. Protecting operators from the physical hazards of a machine has always been the absolute priority.

Today, however, factories are digital, interconnected, and driven by software. A machine is no longer just a collection of gears; it is a node in a complex network. This is where the traditional approach falls short: what happens if a cyberattack bypasses or disables physical safety systems?

The European Union’s answer is the Machinery Regulation (EU) 2023/1230. The message is clear: there can be no true Safety (physical safety) without proper Security (cybersecurity).


The Paradigm Shift: From Directive to Regulation

The transition from the old Machinery Directive 2006/42/EC to the new Regulation is not just a bureaucratic update. As a Regulation, it applies directly across all EU Member States without local interpretations. More importantly, its core content is specifically tailored for Industry 4.0 and 5.0.

Crucially, following a recent official corrigendum, the Machinery Regulation will become fully mandatory on January 20, 2027, when the Directive will be repealed, without a transition period or subsequent overlap.


Here are the three major revolutions introduced by the text:

  • Mandatory Cybersecurity: If control software is hacked, the machine becomes a physical hazard. The regulation mandates that safety-related control systems must be protected against cyber threats. The Cyber Resilience Act (CRA, Regulation (EU) 2024/2847) covers cybersecurity too, but with a different goal. The CRA applies to all products with digital elements that connect to a device or network, machinery or not, and its scope is wider: secure design, vulnerability handling, security updates and incident reporting. The Machinery Regulation looks at cybersecurity when an attack can lead to a hazardous situation. A connected machine is usually in the scope of both regulations, and the CRA itself says that manufacturers must comply with both (Recital 53). 

  • AI and Machine Learning: Machines that "learn" and evolve their behavior after being placed on the market must do so within strict, predictable safety boundaries.

  • Digital Documentation: Manuals and declarations of conformity can finally be provided digitally (e.g., via QR code), as long as end-user access is guaranteed online for at least 10 years and a paper copy of the instructions can be requested free of charge at the time of purchase.


The Two Pillars: Safety vs. Security

To understand the impact of the new regulation, we can summarize how these two worlds must now coexist:


Aspect

Safety (Functional Safety)

Security (Cybersecurity)

Objective

Protect the human from the machine.

Protect the machine from the human (and external threats).

Focus

Hardware failures, human errors, mechanical wear.

Unauthorized access, malware, software tampering.

Solution

Physical barriers, sensors, circuit redundancy.

Encryption, authentication, secure updates.


The Key Principle 

The Regulation states that a cyberattack must never compromise the safety functions of a machine. If a breach occurs, the system must fail-safe (e.g., through a controlled shutdown).

If a breach occurs, the control system must ensure that it does not lead to a hazardous situation (e.g., by withstanding malicious attempts and preventing the degradation of safety functions).


What Manufacturers Need to Do

Time is running out. Anyone manufacturing or modifying industrial machinery must act now on the following fronts:


  1. Safety Risk Assessment and Cybersecurity Risk Assessment

Safety risk assessment and cybersecurity risk assessment are two different activities that shall work together. Manufacturers must evaluate not only mechanical and electrical hazards, but also cyber vulnerabilities within software and communication channels. The traditional functional safety analysis under EN ISO 12100  must be paired with a Threat Assessment to define a SRSL (Safety-Related Security Level from SRSL0 to SRSL3) under the draft standard prEN 50742 for each safety function, using technical guidelines such as UNI CEN ISO/TR 22100-4:2021 to support the risk and vulnerability assessment methodology.


  1. Anti-Corruption Measures

In accordance with Annex III, section 1.1.9, safety-critical hardware and software must be protected against accidental or intentional corruption. This includes securing logical connections, employing multi-factor authentication for critical parameter changes, using VPNs for remote access, and disabling unused physical ports (like USB or SD card slots) to prevent direct physical attacks.


  1. Mandatory Logging for 5 Years 

Systems must automatically record and trace any intervention or modification on safety software or configuration. These tracing logs must be kept for at least 5 years

 to demonstrate compliance to national authorities upon a reasoned request.


  1. Substantial Modification

Any major physical or digital change not planned by the original manufacturer that creates a new hazard or increases an existing risk requires the modifying entity to act as the new manufacturer and completely re-certify the machine.


The Technical Path to compliance: Draft Standard prEN 50742

While the Regulation establishes the legal obligations, technical standards dictate the "how-to". Beyond the general guidance of CEI CLC/IEC/TS 63074:2024 for integrating cybersecurity with the functional safety of control systems, CENELEC is actively finalizing the harmonized standard prEN 50742 ("Protection against corruption").

This standard introduces two distinct compliance pathways:

  • Approach A: Designed to facilitate compliance for machinery developed without references to the complex EN IEC 62443 series.

  • Approach B: Provided for highly interconnected or complex machinery developed within the context of the EN IEC 62443 standards.


An Opportunity Beyond Compliance: Our Value at Your Side

"Safety first, security right after" clarifies  the new rule of the game. Integrating Security by Design is now a strict legal requirement and no longer an optional task.

Manufacturers who embrace this change early will not only ensure compliance but will also deliver more resilient, reliable, and future-proof machinery to the global market.


In Security Pattern we help machine manufacturers bridge this gap:

  • We start at the foundation with expert Threat Modeling and Cybersecurity Risk Assessment, a separate activity from the safety risk assessment, to identify and mitigate vulnerabilities before they can be exploited.

  • We ensure continuous protection against ever-evolving cyber threats by providing ongoing vulnerability monitoring through ARIANNA, the platform designed to keep your industrial devices secure throughout their entire lifecycle.


Don't wait until the deadline. Contact Security Pattern today to secure your software and safeguard your machinery.

 
 
 

Comments


Commenting on this post isn't available anymore. Contact the site owner for more info.
bottom of page